Home Improvement

3 Important Steps to Paint Vinyl Siding

Before you decide to paint vinyl siding, there are a few must-knows. Previously, materials were used for the exterior decoration of buildings that require constant care or are not durable. With the advent of vinyl siding, many of these problems have disappeared.  You may want to change its color over time: you may not need to install new material. Today, siding is one of the simplest painted surfaces. To achieve the desired effect in the painting process, you need to remember three basic principles.

Surface preparation

Wood needs cleaning, grinding, and filling of cavities, but in the case of siding, thorough cleaning is enough. To do this, just use soapy water. There should be no cracks or other damage on the surface. After all the dirt and mold are removed, you can start painting.

Good paint

This is the basis for all painting work. It is best if it was 100% acrylic paint. It fits perfectly with vinyl panels. Also, thanks to it the covering, as a result, will be flexible. For a material such as vinyl siding, this is very important because it tends to expand under the influence of temperature.

Properly chosen color

Previously, siding could only be painted in light and pastel colors, as dark ones threatened to distort the panels. However, today paints designed for this type of surface contain special pigments. They reflect infrared radiation and prevent distortion, so darker colors are also available. You should carefully read the label before buying and consult with the seller piso wifi pause.

5 ways to extend the life of facade paint

You can paint vinyl siding so long as you’re prepared to undertake a detailed process without cutting corners, or you can pass the job over to a professional.

Before you decide to paint your vinyl siding, make sure it’s all in good condition, i.e. that there are no warping, or broken or loose pieces.

  1. Work in appropriate weather conditions. Optimally, it will be a sunny day with a light wind, when the temperature is from 15 to 30 ° C. Applying the paint at too high humidity, strong sunlight or very low temperature leads to the fact that the resulting coating begins to peel quickly.
  2. Start with a primer. It creates a transition layer that binds the paint better and reduces the risk of peeling and cracking. And thanks to it, the final coating has a more uniform color and shine. An alternative is to use two to three layers of 2in1 product (paint + primer).
  3. Use dispersion paint with 100% acrylic content. This creates a strong but flexible coating that fits perfectly to the substrate and retains intense color for a long time. It is worth investing in quality: high-class paints can last up to 10 years without renewal, and lower quality – no more than 3-4 years.
  4. Think about your shade. Earth colors are the strongest, while bright, such as blue or red – relatively quickly lose their saturation. If you want to have a distinct shade, you should be aware of the fact that it will need more frequent updates.
  5. Do not spare the paint. The thicker the coating, the better the surface protection. Also, remember that you should not dilute the paint (the formulas of facade paints that fall into the hands of buyers are designed to provide the best long-term protection_.

Now you know how to paint vinyl siding. Listen to our tips to get the desired effect that will last as long as possible. But professional siding contractors are best tasked for this job, as they’ll understand the proper technique and pressure to use for optimal results. Oftentimes, homeowners consider painting vinyl siding instead of replacing it to save money. While this is generally true, painting vinyl siding can still be a costly job.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *